The Rotary Chuck Adapter (DRAWINGS)
$7.00
So you want to make your own rotary chuck adapter? Great choice. Here is the drawing I used to make this project.
This purchase is for the technical drawings I made to create this Rotary Chuck Adapter.
Note: This purchase is for a technical drawing only. This is not for a physical product.
Description
So you want to make your own rotary chuck adapter? Excellent. Here are the drawings I used to make in this video.
This adapter is intended to mimic a D1-5 Camlock lathe chuck mount.
In addition to the raw materials, you will also need the following:
(6) 5/16-18 x 0.75in Socket Head Cap Screws (McMaster-Carr 91251A581)
(3) 1/2-13 x 1.75in Docket Head Cap Screws (McMaster-Carr 91251A716)
(6) Compression Springs (McMaster-Carr 9434K53)
After your purchase, you will receive an email confirmation of the order with a link to download the drawing PDF. If you have any questions just give me a shout at inheritancemachining@gmail.com.
Note: This purchase is for a technical drawing only. This is not for a physical product.
Reviews
There are no reviews yet.