The 5C Collet Blocks (DRAWINGS)
$7.00
You’ve decided you need some collet blocks? Great choice. Here is the drawing I used to make this project.
This purchase is for the technical drawings I made to create these collet blocks.
Note: This purchase is for a technical drawing only. This is not for a physical product.
Description
You’re ready to make yourself a pair of collet blocks? Excellent. Here are the drawings I used to make the blocks shown in this video.
You will be purchasing the design drawing for the collet block project. This includes a square collet block and a hexagonal collet block.
It includes the change to the wrench flats on the collet nut.
One additional change was the taper on the receiving end. I show 10 degrees but during the project I went with a 9 degree taper.
If you end up building a set for yourself I would love to see!
After your purchase, you will receive an email confirmation of the order with a link to download the drawing PDF. If you have any questions just give me a shout at inheritancemachining@gmail.com.
Note: This purchase is for a technical drawing only. This is not for a physical product.
Reviews
There are no reviews yet.