Rotary Fixture Plate (DRAWINGS)
$7.00
So you want to make your own rotary fixture plate? Great choice. Here is the drawing I used to make this project.
This purchase is for the technical drawings I made to create this project.
Note: This purchase is for a technical drawing only. This is not for a physical product.
Description
So you want to make a rotary fixture plate so you don’t have to drag out a giant rotary table? Excellent. Here are the drawings I used in this video.
These are the plans as drawn for the vise mountable rotary fixture plate. I’ve also included drawings for the dovetail slides even though they could use some improvements. Perhaps one of you may find a better way!
Most of the materials I used and have listed on the drawings aren’t strictly required (i.e. the tool steels), I just used blanks I had available at the time. But if you have any questions on alternatives just ask!
Along with raw materials the following hardware is needed:
(5) SHCS, 5/16″-18 x 1-1/2″LG, BLK OX (for vise block)
(2) SHCS, 1/4″-20 x 1-1/4″LG, BLK OX (for stop locks)
(2) SHCS, 1/4″-20 x 1″LG, BLK OX (for stop adjust)
(2) SHCS, 1/4″-20 x 0.75″LG, BLK OX (for dovetail slides)
(5) SHCS, #10-32 x 3/4″, BLK OX (for bushing and collar
Of course if you end up making one of these I’d love to see!
Happy Machining!
After your purchase, you will receive an email confirmation of the order with a link to download the drawing PDF. If you have any questions just give me a shout at inheritancemachining@gmail.com.
Note: This purchase is for a technical drawing only. This is not for a physical product.
Reviews
There are no reviews yet.